Complete Extraction & Distillation Facility - Oklahoma Commercial Operation

Shivhem ultrasonic extraction tank system, model SL125K50CB. Includes (4) Four stainless steel ultrasonic extraction tanks with a volume of 500L each mounted on a platrom a and rated for a working pressure of 0.1 MPa and a maximum temperature of 100°C. The system features a control panel, multiple gear motors, piping, and connections. Components show signs of use but appear structurally intact. Suitable for industrial extraction processes.

Industrial processing equipment including stainless steel tanks, agitators, pumps, and pipes. The lot features Two (2) 500L Solvent Recovery Tanks Jacketed Condensation Tube w/ High Mount Stand Jacketed 600L Kettle with heat exchangers 600L Paddle Evaporator with mounted motor for paddle agitation • multiple tanks with attached fittings, valves, and motors, as well as diaphragm pumps, heat exchangers, and associated piping systems. Equipment appears to include both pressurized and non-pressurized vessels. This lot is suitable for liquid and gas handling processes. Condition and working status are confirmed. .

Scraper Bottom Discharge 304 SS Centrifuge

This heavy duty centrifuge and comes with a platform surrounding the main unit.  It has an explosion proof electrical box and control station. It has 4 isolation pads. It is meant for an explosion proof environment and used for moving biomass in and out of containers

Main unit material: Stainless steel - 304 

Diameter: 48” X 24”H

Volume: 350L (Solids) 

Capacity: 440L Max. 

Speed: 1000r/min G-Force: 700 

Motor Power: 22KW, Explosion proof 

Weight: 4,800KG/ 10,500 lbs for main unit. With its base, the weight is approximately 18,000#

Centrifuge working platform (Q235) side walk and guard rails 

Damper leg cover (stainless steel) 

Explosion proof control panel 

Equipped w/ Hydraulic device,

Scraper Bottom Discharge 304 SS Centrifuge

This heavy duty centrifuge and comes with a platform surrounding the main unit.  It has an explosion proof electrical box and control station. It has 4 isolation pads. It is meant for an explosion proof environment.

Main unit material: Stainless steel - 304 

Diameter: 48” X 24”H

Volume: 350L (Solids) 

Capacity: 440L Max. 

Speed: 1000r/min G-Force: 700 

Motor Power: 22KW, Explosion proof 

Weight: 4,800KG/ 10,500 lbs for main unit. With its base, the weight is approximately 18,000#

Centrifuge working platform (Q235) side walk and guard rails 

Damper leg cover (stainless steel) 

Explosion proof control panel 

Equipped w/ Hydraulic device,

Christianson Push-Pac 30 pneumatic conveyor system equipped with a Baldor Electric Co. motor (specifications Model: F190213138R, HP: 1.5). Accompanying this is a Toshiba motor (Model: 021045DSR41A-P, HP: 10). The system is UL certified for Class I and II environments. Mounted on pallets, the equipment features a robust design and an identification tag by Christianson Systems, Blomkest, MN, USA.

System Overview - This piece is LOCATED IN TULSA OKLAHOMA - BIDDING ON 1 EXTRACTION LINE ONLY

The Vitalis PrimeEx™ R-Series Gen 1.0 (Revision 09.1 – June 2020) is a high-throughput, closed‐loop CO₂ extraction platform designed for industrial-scale production of botanical extracts (e.g., oils, concentrates). Built for durability, reliability and scalability, this system is a strong fit for operations looking to step into large-batch extraction while maintaining flexibility for future upgrades. According to Vitalis, the R-Series line offers both mono-solvent (pure CO₂) and optional co-solvent modes (with an add-on injection system) for greater product versatility. Vitalis+2Vitalis+2

Key Capabilities & Highlights

• High throughput capacity: For example, the R-200 “S” variant (Gen 1.0) is rated to process ~30 kg (66 lbs) of biomass per run, with an average runtime of ~6 hours — translating to ~120 kg (264 lbs) per 24-hour period under mono-solvent mode. Scribd
• Dual “extraction chambers + separation lines” design: This allows for overlapping processes – one chamber can be loading/prepping while the other is running, improving uptime. Scribd
• Closed-loop CO₂ system (subcritical + supercritical): Enables both gentle and high‐energy extractions depending on feedstock and desired compounds; helps maintain clean extracts with better reproducibility. Vitalis
• Optional Co-Solvent Injection System (CIS): For operators who want to push throughput or extract different compound classes, the R-Series Gen 1.0 supports Vitalis’ CIS add-on: e.g., injection pressures up to 2,500 psi, ethanol as approved co-solvent, automated control features included. Scribd+1
• Robust physical build: Example specs from the R-200 line – footprint of ~195″ × 124″ × 157″; weight 6,640 lbs (3,020 kg) for the “S” model. Scribd
• Support & reliability: Vitalis emphasizes “true reliability” and supports continuous operation with lifetime warranty on pressure vessels and upgrade paths. Vitalis
• Scalability: The R-Series includes 200 L and 400 L configurations (for larger operations). Vitalis

Technical Specifications (Gen 1.0 – example model R-200)

Ideal Use-Case & Value Proposition

For companies in the botanical extraction space (whether CBD/terpenes, essential oils, niche botanicals), this system offers:

• Industrial scale: If you’re processing hundreds to thousands of kilograms of biomass per year, the R-Series gives you the capacity and reliability.
• Clean, reproducible output: Closed-loop CO₂ minimizes solvent carry-over, reduces post-processing burden, and supports high-quality extracts.
• Upgrade potential: Start mono-solvent, later add co-solvent injection to expand product lines or boost throughput.
• Reduced downtime: Dual chambers and strong support from Vitalis help maximize uptime — which means more output, generation of revenue (that’s the silver lining, Auction John).

Resale / asset strength: As a premium OEM, Vitalis systems tend to hold value; for a savvy operator this can offset cost of entry

System Overview - This piece is LOCATED IN TULSA OKLAHOMA - BIDDING ON 1 EXTRACTION LINE ONLY

The Vitalis PrimeEx™ R-Series Gen 1.0 (Revision 09.1 – June 2020) is a high-throughput, closed‐loop CO₂ extraction platform designed for industrial-scale production of botanical extracts (e.g., oils, concentrates). Built for durability, reliability and scalability, this system is a strong fit for operations looking to step into large-batch extraction while maintaining flexibility for future upgrades. According to Vitalis, the R-Series line offers both mono-solvent (pure CO₂) and optional co-solvent modes (with an add-on injection system) for greater product versatility. Vitalis+2Vitalis+2

Key Capabilities & Highlights

• High throughput capacity: For example, the R-200 “S” variant (Gen 1.0) is rated to process ~30 kg (66 lbs) of biomass per run, with an average runtime of ~6 hours — translating to ~120 kg (264 lbs) per 24-hour period under mono-solvent mode. Scribd
• Dual “extraction chambers + separation lines” design: This allows for overlapping processes – one chamber can be loading/prepping while the other is running, improving uptime. Scribd
• Closed-loop CO₂ system (subcritical + supercritical): Enables both gentle and high‐energy extractions depending on feedstock and desired compounds; helps maintain clean extracts with better reproducibility. Vitalis
• Optional Co-Solvent Injection System (CIS): For operators who want to push throughput or extract different compound classes, the R-Series Gen 1.0 supports Vitalis’ CIS add-on: e.g., injection pressures up to 2,500 psi, ethanol as approved co-solvent, automated control features included. Scribd+1
• Robust physical build: Example specs from the R-200 line – footprint of ~195″ × 124″ × 157″; weight 6,640 lbs (3,020 kg) for the “S” model. Scribd
• Support & reliability: Vitalis emphasizes “true reliability” and supports continuous operation with lifetime warranty on pressure vessels and upgrade paths. Vitalis
• Scalability: The R-Series includes 200 L and 400 L configurations (for larger operations). Vitalis

Technical Specifications (Gen 1.0 – example model R-200)

Ideal Use-Case & Value Proposition

For companies in the botanical extraction space (whether CBD/terpenes, essential oils, niche botanicals), this system offers:

• Industrial scale: If you’re processing hundreds to thousands of kilograms of biomass per year, the R-Series gives you the capacity and reliability.
• Clean, reproducible output: Closed-loop CO₂ minimizes solvent carry-over, reduces post-processing burden, and supports high-quality extracts.
• Upgrade potential: Start mono-solvent, later add co-solvent injection to expand product lines or boost throughput.
• Reduced downtime: Dual chambers and strong support from Vitalis help maximize uptime — which means more output, generation of revenue (that’s the silver lining, Auction John).

Resale / asset strength: As a premium OEM, Vitalis systems tend to hold value; for a savvy operator this can offset cost of entry

System Overview - This piece is LOCATED IN TULSA OKLAHOMA - BIDDING ON 1 EXTRACTION LINE ONLY

The Vitalis PrimeEx™ R-Series Gen 1.0 (Revision 09.1 – June 2020) is a high-throughput, closed‐loop CO₂ extraction platform designed for industrial-scale production of botanical extracts (e.g., oils, concentrates). Built for durability, reliability and scalability, this system is a strong fit for operations looking to step into large-batch extraction while maintaining flexibility for future upgrades. According to Vitalis, the R-Series line offers both mono-solvent (pure CO₂) and optional co-solvent modes (with an add-on injection system) for greater product versatility. Vitalis+2Vitalis+2

Key Capabilities & Highlights

• High throughput capacity: For example, the R-200 “S” variant (Gen 1.0) is rated to process ~30 kg (66 lbs) of biomass per run, with an average runtime of ~6 hours — translating to ~120 kg (264 lbs) per 24-hour period under mono-solvent mode. Scribd
• Dual “extraction chambers + separation lines” design: This allows for overlapping processes – one chamber can be loading/prepping while the other is running, improving uptime. Scribd
• Closed-loop CO₂ system (subcritical + supercritical): Enables both gentle and high‐energy extractions depending on feedstock and desired compounds; helps maintain clean extracts with better reproducibility. Vitalis
• Optional Co-Solvent Injection System (CIS): For operators who want to push throughput or extract different compound classes, the R-Series Gen 1.0 supports Vitalis’ CIS add-on: e.g., injection pressures up to 2,500 psi, ethanol as approved co-solvent, automated control features included. Scribd+1
• Robust physical build: Example specs from the R-200 line – footprint of ~195″ × 124″ × 157″; weight 6,640 lbs (3,020 kg) for the “S” model. Scribd
• Support & reliability: Vitalis emphasizes “true reliability” and supports continuous operation with lifetime warranty on pressure vessels and upgrade paths. Vitalis
• Scalability: The R-Series includes 200 L and 400 L configurations (for larger operations). Vitalis

Technical Specifications (Gen 1.0 – example model R-200)

Ideal Use-Case & Value Proposition

For companies in the botanical extraction space (whether CBD/terpenes, essential oils, niche botanicals), this system offers:

• Industrial scale: If you’re processing hundreds to thousands of kilograms of biomass per year, the R-Series gives you the capacity and reliability.
• Clean, reproducible output: Closed-loop CO₂ minimizes solvent carry-over, reduces post-processing burden, and supports high-quality extracts.
• Upgrade potential: Start mono-solvent, later add co-solvent injection to expand product lines or boost throughput.
• Reduced downtime: Dual chambers and strong support from Vitalis help maximize uptime — which means more output, generation of revenue (that’s the silver lining, Auction John).

Resale / asset strength: As a premium OEM, Vitalis systems tend to hold value; for a savvy operator this can offset cost of entry

Oil heater with hydraulic pump, housed within a blue-painted metal frame, and equipped with visible control valves and pipe fittings. Includes a cylindrical heating chamber with labeled 'VENT' on the lid and a connected hydraulic system. Components exhibit surface wear and visible rust, suggesting prior use. Ideal for industrial or mechanical applications.

Industrial-grade refrigeration unit featuring a stainless steel casing and robust internal components. Includes a control panel with comprehensive wiring and circuit configuration. The unit features pressure-rated components, piping, and a compressor. Manufacturer and technical specifications can be referenced on attached labels, indicating durability and high-pressure capabilities. Suitable for large-scale cooling operations.

Stainless steel pressure filter vessels mounted on a metal support frame. Each vessel features a pressure gauge on the lid and multiple fasteners for securing the lid. Outlets and valves are present for fluid flow management. Suitable for industrial filtration applications. Dimensions and flow capacity not specified. Signs of prior use visible.

Stainless steel pressure vessel with a bolted top and multiple connection ports, designed for industrial applications. Features include a secure lid fitted with eyebolts for tight sealing and a cylindrical body mounted on three sturdy legs for stability. Suitable for filtration, mixing, or liquid processing. In good condition with no visible signs of damage.

Stainless steel pressure vessel featuring a cylindrical body, tri-clamp ports, and a cone-shaped bottom with three supporting legs. The vessel includes various access ports and fittings for easy integration into industrial or laboratory systems. Suitable for use in processing, manufacturing, or storage applications.

Stainless steel cylindrical storage tank with tri-clamp connections and a domed top. Features include multiple port openings, conical bottom with tri-legged support, and a polished exterior. Designed for industrial or commercial use. Clean and in good visible condition. Dimensions and capacity are not specified.

Shivhem Enterprises single-effect evaporator, Model DGN-0.5, designed for use at a nominal volume of 500 L/h. Constructed from SUS304 stainless steel with aluminum silicate insulation. Operational specifications include a working pressure range of -0.08 MPa to 0.09 MPa and working temperatures of 60-75 degrees Celsius with a maximum shell pass temperature of 125 degrees Celsius. Heating exchange area of 10 m² and a condenser area of 18 m². Ex factory date: March 2019.

Stainless steel industrial vessel designed for fluid processing or storage. Features multiple inlet and outlet fittings, a conical top section, cylindrical body, and welded seams. Suitable for use in industrial environments such as food, pharmaceutical, or chemical settings. Dimensions and specific capacity are not provided.

Stainless steel plate heat exchanger designed for efficient thermal transfer, featuring multiple ports for fluid input and output. Includes tightly packed plates to ensure optimal heat exchange. In good condition, showing no significant signs of wear. Ideal for industrial applications in heating, cooling, or fluid processing.

Stainless steel distillation column, featuring a high-polish finish, equipped with integrated fittings, valves, and ports. Suitable for industrial or commercial processing applications. The equipment includes a bottom base section and a top column unit with lateral openings and a pressure relief valve. Additional piping and accessory connections visible.

Stainless steel plate heat exchanger featuring a series of metal plates for efficient heat transfer. Includes multiple inlet and outlet ports for versatile connection options. The unit shows signs of prior use but appears structurally intact. Ideal for industrial or processing applications.

Stainless steel industrial process column designed for use in various chemical or pharmaceutical industries. Featuring multiple inlets and outlets, this unit is suitable for distillation, reaction, or other processes. Constructed with durable stainless steel, it likely ensures resistance to corrosion. Condition appears to be good with visible signs of industrial storage or handling.

Stainless steel industrial heat exchanger unit with multiple ports for inlet and outlet connections. Features include bolted construction for ease of maintenance and corrugated plates for effective heat transfer. Unit is mounted on a wooden platform. Condition shows signs of previous use with some minor wear visible.

Industrial-grade cylindrical stainless steel pressure vessel designed for secure liquid or gas containment. Features a secure lid with multiple clamp closures, bottom valve assembly for controlled discharge, and a sturdy tripod stand for stability. Suitable for applications in the pharmaceutical, chemical, or food processing industries. Condition shows moderate wear from prior use; full functionality unverified.

500L liquid storage tank manufactured by Shivhem Enterprises in 2018. Constructed from SUS304 stainless steel, the tank operates at normal working and design pressure and temperature. It is designated for liquid storage and includes tripod legs for stability. Model: CG-0.5; Product Code: CZ181044. Located in Houston, Texas, USA. Features a hatch, valve, and other standard fittings.

Shivhem Enterprises vacuum concentrator with a nominal volume of 500 liters. Constructed from SUS304 stainless steel with mineral wool insulation. Features a 2.2 kW explosion-proof motor, maximum working temperature of 125°C, and mixing speed of 36 rpm. Jacket working pressure rated at 0.25 MPa. Model CZ181051, date of manufacture October 2018. Suitable for industrial applications.

500L Extract Liquid Storage Tank manufactured by Shivam Enterprises. Constructed from SUS304 stainless steel, this tank is designed to hold liquid under normal pressure and temperature conditions. Features include a mounted cover, multiple ports, and tripod legs for stability. Model: CG-0.5, and ex-factory date of September 2019.

1000L concentrated liquid storage tank manufactured by Shivhem Enterprises. Made of SUS304 stainless steel with a design and working pressure of normal pressure. Design and normal operating temperature are specified as normal temperature. Product code CZ181240, ex-factory date December 2018. Features include a secure lid and supporting legs for stability.

Stainless steel concentrated liquid storage tank made by Shivhem Enterprises. Model CG-1.0 with a nominal volume of 106 gallons. Fabricated from SUS304 stainless steel and designed for normal pressure and temperature. Ex-factory date: July 2019. Unit is mounted on three legs and features a secure top entry lid.

Industrial-grade stainless steel tank featuring tri-clamp fittings for easy connection and maintenance. Includes a secure lid with locking clamps and integrated support legs for stability. Appears equipped with multiple ports for versatile use, ideal for liquid storage or processing. Durable and corrosion-resistant construction.

Two stainless steel industrial units. The first is an upright cylindrical filtration tank with multiple ports and flanged openings. The second is a cone-bottom tank with an upper chamber, equipped with various port connections and a bottom drain. Both items are made of stainless steel, designed for industrial or processing purposes. Dimensions are not specified.

3000 L Mixing Tank

Stainless steel horizontal pressure tank featuring multiple ports and a cylindrical body. Equipped with flanged connections and mounted on a base frame. Constructed of stainless steel for durability and resistance to corrosion. Suitable for industrial or processing applications. Condition appears used, and the tank may require inspection or cleaning before use.

Industrial tanks featuring black insulation material affixed to metal frames. Tanks are supported by sturdy metal bases and show evident wear from use, including peeling insulation and weathering. - Includes an internal removable filtering screen for fabric filtering system in each of the 6 tanks. Ideal for industrial repurposing or scrap use.

5000-liter alcohol storage tank manufactured by Shivhem Enterprises in 2018. Constructed of SUS304 stainless steel, this cylindrical tank is rated for normal pressure and temperature. Features include a manway access port, multiple connection points, and a polished exterior. Suitable for liquid alcohol storage. Overall condition appears used but well-maintained.

CTS cooling tower, constructed from durable materials. Includes an associated pump and pipe system, making it suitable for industrial cooling applications. Visible signs of wear and rust on some components, indicating usage. Sold as-is with all visible accessories included. Suitable for refurbishment or replacement of parts as needed. Working 3ph Motor / pump – complete working system.

Burnham Commercial Boiler featuring a Power Flame burner. Unit details include model numbers shown on data plates, gross steam output of 1067 lbs/hr, and input options for gas and oil. Includes safety valve, burners, and other components. The unit appears mounted on a rusty platform and may require servicing. Manufactured in Lancaster, PA, USA.

Auger conveyor system featuring a metal hopper, motor, and auger. The assembly includes visible wiring and appears to be mounted on a metal frame. Signs of use and rust are apparent on the components. Ideal for material handling or industrial applications. Condition and functionality should be verified prior to use.

Various stainless steel scrap pieces, primarily organized into two piles with additional random pieces. Components include pipes, valves, and other stainless steel parts. Some items are mixed with debris. Located within a 3-foot radius of the main piles. Suitable for salvage or recycling purposes.

Two stainless steel industrial hoses with attached valves and fittings. Features woven metal flexible hoses and multiple industrial-grade valves with blue handles. Ideal for use in industrial or mechanical applications requiring robust performance components. Condition is visibly used but appears functional. **** Goes with Centrifuge Lot 2B ****

A selection of scrap pumps composed of aluminum with stainless steel fittings. Items are stored in a sturdy metal cage. Suitable for parts, materials salvage, or related industrial applications. Condition reflects wear consistent with scrap materials.

Three plastic totes on wheels designed for storing dry ice and chillers. Each tote features a hinged lid for secure containment and portability, with visible wear from prior use. Copper coils are installed inside, likely for cooling or chiller operations. These units show surface discoloration and signs of heavy-duty use, appropriate for industrial applications.  Qty is 3, so 3x the bid.

ThermoSafe Model PR700 insulated chemical and dry ice storage container, Serial No. 4765. Designed for cold chain logistics or temperature-sensitive materials. Features a durable blue exterior with markings identifying the manufacturer and intended use. Includes labels warning about chemical hazards and extreme cold. Dimensions and capacity are unspecified. Exterior shows signs of wear consistent with use.

Marchisio stainless steel plate and frame filter press, designed for industrial fluid filtration. Made in Piove di Teco, Italy, and CE certified. Features an adjustable filtration section with multiple plates, two pressure gauges, and connection points for fluid inlets/outlets. Mounted on a wheeled base for portability. Ideal for beverage, chemical, or similar industries.

Stainless steel plate and frame filter press equipped with pressure gauges mounted on a movable cart. Suitable for filtration processes in various industries, this unit features a series of stacked plates and frames for efficient filtering. Includes manual adjustment via a handwheel and is designed for mobility, facilitating easy handling. CE-certified.

Acme Electric large general-purpose transformer, model T3, catalog number T33K0013B. Rated at 75 kVA, 3-phase, 60 Hz. Primary voltage 480/240 with taps, secondary voltage 208Y/120 volts. Enclosure type 3R with weathershield, insulation system of 220 degrees Celsius, and class 220 rating. Made in Mexico. Item in used condition and mounted on a pallet.

USALab RH-30L Reactor System designed for chemical and laboratory applications. Features a 30L capacity, 5KW power output, 220V/60HZ voltage, and includes an agitator. Manufactured in November 2019. The unit displays signs of use, but appears to be complete, with control components and connectors visible.

Steele enclosed control panel designed for use in the hemp extraction industry. Constructed with extremely heavy steel, it features various buttons, knobs, and connectors for industrial control applications. Unit is pre-owned and designed for industrial environments. Its exact dimensions and weight are not specified but noted as substantial.

Manufacturer Controls Engineering electrical panel enclosure, featuring a single-phase main supply at 60 Hz with a full load of 25A and largest load of 25A. Includes an on/off control knob, UL File number E136676, and serial number 9909-002. Suitable for industrial usage, the enclosure is a hinged metal box with a handle. Condition shows signs of surface wear and oxidation from prior use.

Steel control panel designed for use in the extraction process. Constructed with a heavy steel enclosure, this unit is robust and durable, suitable for industrial applications. Features numerous control buttons and indicators on the panel. Weight and additional specifications not provided. Sold as-is, may require inspection or servicing.

Steel enclosed control panel designed for industrial extraction processes. Constructed from durable steel, this unit is built to withstand heavy use in demanding environments. Includes multiple push-button controls and monitoring windows on the front panel. Extremely heavy, indicating robust construction. Ideal for use in industrial applications requiring precision and reliability.

Quantity of three Square D electrical panels. Each panel features a metal construction and multiple knockouts for wiring. Visible external handles and circuit breaker components are present. Condition appears consistent with typical use, with some signs of wear such as scratches and minor surface discoloration.

Electrical control panel housed in a steel cabinet, featuring operational buttons, switches, and indicator lights on the front panel. Interior contains wiring, relays, contactors, and other electrical components. Suitable for industrial or commercial use. Dimensions, manufacturer, and specifications not stated. Used condition, sold as is.